PACKET TRACER ACTIVITY 1.4.1.3 PC
Then, you need to address the PC according to the IP block of the network on which the network is. To do this, click on the PC to which you will assign an IP, and on the Desktop tab, click IP Configuration. Now, you need to assign an IP address to the computers that you add to the topology. In the following image, you can see that the router’s GigabitEthernet ports are connected to the Switches and are active. %SYS-5-CONFIG_I: Configured from console by console %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to up Router(config)#interface gigabitEthernet 0/1 To assign an IP address to the GigabitEthernet 0/1 interface and activate the port, perform the following commands: Router(config)# The meaning of this color is The interface is active and working. %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to upĪfter configuring the GigabitEthernet0/0 interface, the port will be green. %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up Router(config)#interface gigabitEthernet 0/0 Router>enĮnter configuration commands, one per line. In the Cisco router CLI window, assign an IP address to the GigabitEthernet0/0 interface and execute the no shutdown command to activate the interface. Then note the port and slot numbers of the router’s GigabitEthernet interfaces in the workspace.ĭouble-click on the router to open the IOS Command Interface. Now, follow the steps below to examine how computers on two segments (two different LANs) connected to the Cisco Router on Packet Tracer communicate.Īdd one Cisco Router, two Cisco Switches, and four PCs on the program’s workspace. In addition, if you are an instructor, you can prepare network activities for your students and test their network knowledge.
PACKET TRACER ACTIVITY 1.4.1.3 SOFTWARE
This software gives you simpler usage by making sure you don’t have to deal with the Cisco IOS images required by GNS3. In Packet Tracer, you can add a Router, Switch and PC to the working environment to create a basic network and examine how data communication takes place between computers. At the same time, those who want to develop themselves in the field of network and system technologies are also using this program. Please note that this software is not only used for one exam. With Cisco’s free network simulator software PT, you can easily prepare for network exams.